LabubaRAT is a remote access Trojan built for Windows computers. It can arrive disguised as legitimate NVIDIA software, using familiar-looking names and product information to appear trustworthy at first glance. Opening the fake program may give an unknown operator extensive control of the affected device.
Once active, LabubaRAT surveys the computer, recording its hardware, browsers, network details, and installed security tools. A criminal can then quietly issue commands, capture the screen, copy or plant files, handle compressed archives, and route internet activity through the victim’s connection.
The malware can arrange to launch whenever the user signs in, allowing unauthorized access to continue after a restart. Because it can communicate in several ways and accept different settings at launch, the same program appears suitable for repeated use across separate attack campaigns.
We tested that SpyHunter successfully removes LabubaRAT* and we recommend using it. It will block LabubaRAT from reinstalling itself and it will make sure your device is clean from any malware.
Try Free For 7 Days*
Buy now15% OFF if you buy straight without trial.
An infection, similar to Malware-gen[Trj, may expose private documents, account activity, workplace information, and other systems reachable from the computer. Users who notice the suspicious file or unexplained remote-control activity should disconnect the device and follow the removal guide. When manual cleanup is too difficult, SpyHunter 5 can remove unwanted programs and viruses.
LabubaRAT Removal Guide
The quick removal section is a first pass for LabubaRAT and should be tried before the longer guide. It focuses on recent files and visible programs, where the easiest leftovers usually appear. If that does not work, continue below.
Quick Manual Removal for LabubaRAT – Try This First
- 1.1First, go to your downloads folder (This PC > Downloads), sort the items there by date, and see if any suspicious files have been downloaded recently. Found anything fishy? Delete it before continuing.
- 1.2Next, go to the Start Menu, navigate to Settings (the gear icon), and then to Apps.
- 1.3You’ll see all installed programs listed on that page – sort them by installation date and look for LabubaRAT or anything else that looks suspicious, unfamiliar, or unwanted.
- 1.4If you find LabubaRAT or another sketchy app, select it and start the uninstallation process. Be careful when following the uninstallation prompts so that you don’t let anything linked to the program remain on your PC.
-
1.5Afterward, look for the installation directory. You’ll often find it at
C:\UserNames\UserName\AppData\Local\Programs\, but it might also be elsewhere. - 1.6If you find the malware folder, remove it together with any leftover files that might still be in it.
Restart once the quick pass is complete. If the computer behaves normally afterward, you may not need the deeper sections. If the same symptoms come back, continue with the full cleanup sequence.
SUMMARY:
OFFERHow to Fully Get Rid of LabubaRAT
SpyHunter 5 is recommended at the start of the full guide because it can scan for hidden LabubaRAT files, entries, and leftovers. You can skip it, but using it may remove the infection before you perform the more advanced manual work.
Fastest Removal Option: Use SpyHunter 5
- 1.1Click here to download and install the anti-malware tool on your PC.
- 1.2Start SpyHunter 5, click the Buy button and choose between starting your 7-days free trial or directly purchasing the tool.
If you choose to buy SpyHunter 5 now, you can use our discount code, “HTRG15“, for 15% off.
- 1.3Once you activate SpyHunter, click Start Scan Now, select the Full Scan option, and let the tool do its job.
- 1.4Once the scan completes (it could take a while, so have patience), you’ll see all malware and other undesirables listed.
Click Next to review the detections and then click Next again to delete all rogue items.
Preparatory Steps for Removing LabubaRAT
A successful manual cleanup of LabubaRAT begins by making hidden files visible and preparing a locked-file remover. These steps make later deletion easier because malicious folders are often concealed or protected by active processes.
1. Preparing for the LabubaRAT Removal
- 1.1The first preparatory step you must perform is to enable the visibility of hidden files and folders.
Do this by searching for Folder Options in the Start Menu and selecting the View tab. Then activate “Show hidden files and folders” and save the change by clicking Apply and then OK. - 1.2Next, you’ll need to download and install a free utility called LockHunter It’s crucial because it lets you delete files locked by malicious processes.
The manual guide does not depend on extra software in every step. The added utility is recommended only because locked files are common with Trojans, and Windows may otherwise block removal of the correct folder.
Download and install LockHunter before the file-deletion stage. It is free, does not require registration, and gives you an option when normal deletion produces an in-use error.
Remove LabubaRAT Processes From the Task Manager
Use Task Manager to locate suspicious processes that could be part of LabubaRAT. Malware can use different names on different systems, so look beyond the label and consider resource use, path, publisher, and timing.
2. How to Delete LabubaRAT Processes in the Task Manager
-
2.1This is done through the Task Manager which you can open by pressing
Ctrl + Shift + Esc. - 2.2If it shows a simplified view, click More Details to expand it and see all running processes.
- 2.3Sort the list of processes by how much Memory or CPU they are using. Then look out for any that are using unusually large amounts of either resource type and yet don’t seem related to any legitimate programs that you have on your PC.
Note: Don’t expect to find a rogue process named “LabubaRAT“. Most forms of malware will hide their processes under innocent-looking names.
- 2.4For each dubious process, right-click it and select Open file location. This will lead you to a folder where the data used by this process is stored.
- 2.5You must delete that entire folder, but you’ll likely get an error when you attempt to do that because some of the files there are in use by the malware. The workaround is to use LockHunter: right-click the folder, select “What’s locking this folder?” from the context menu, and click Delete in the next window.
- 2.6After removing the files, go back to Task Manager, write down the name of the rogue process (you’ll need it later), then click it, and click the End Task button to quit it.
Delete LabubaRAT Virus Files
The files belonging to LabubaRAT may be distributed across several Windows locations. Check the folders below carefully, including startup and AppData paths, because each leftover helper file can keep the cleanup from being complete.
3. How to Get Rid of LabubaRAT Files
-
3.1Start by examining the Startup folders at:
C:\ProgramData\Microsoft\Windows\Start Menu\Programs\StartupC:\Users\*Your Username*\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Startup -
3.2Search them for suspicious files, but if you aren’t what files are rogue, just delete everything in those folders except for the
desktop.inifile, which is a standard system file. -
3.3Next, inspect the
Program FilesandProgram Files (x86)in yourC:drive. Some malware apps will create folders there, so look for anything that looks linked to LabubaRAT or that is otherwise unrecognized or out-of-place folders. Delete anything suspicious you may find. -
3.4Three other locations you must check are:
C:\Users\%user%\AppData\Local\C:\Users\%user%\AppData\Local\Programs\C:\Users\%user%\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\
Again, if you notice anything fishy in them, it must be deleted. And if there’s a folder you aren’t sure about, it’s probably best to get rid of it. At worst, it will be something harmless linked to a legitimate program in your system. However, if you didn’t recognize its name right away, chances are it’s something you either don’t need or something that’s outright unwanted (like LabubaRAT). -
3.5Finally, remember to clear the Temp folder. It’s located at
C:\Users\YourUsername\AppData\Local\Temp.
It stores only temporary files, which are all okay to delete. So, to save yourself some time spent looking for malware files, just Ctrl + A to select everything, and then press Delete from your keyboard to delete all of the folder’s contents.
Get Rid of LabubaRAT Scheduled Tasks
Task Scheduler should be checked because LabubaRAT can use it to run after login, at startup, or at timed intervals. Remove scheduled entries only when their action points to an unknown or malicious file.
4. Eliminate LabubaRAT Scheduled Tasks
- 4.1Open the Task Scheduler by searching for it in the Start Menu search bar. Then, one by one, review the scheduled tasks in the Task Scheduler Library.
-
4.2For each task, double-click it and open the Actions tab, where you can learn what it is that the task is set to perform. Look for tasks that run unfamiliar executables, scripts, or anything located in the
AppDataorRoamingdirectories. - 4.3If you come across a task that executes anything suspicious, write down its file path, then right-click the task, and select Delete.
- 4.4After that, go to the file path you saved and delete the file that the task was set to run.
Uninstall the LabubaRAT Malware App Through the Windows Registry
This registry section removes values that may help LabubaRAT persist. Work carefully and avoid deleting whole keys unless instructed. When in doubt, use SpyHunter 5 so the registry cleanup is handled automatically.
5. Remove LabubaRAT Through the Registry
- 5.1Type “regedit” in the Start Menu and hit Enter to go to the Registry Editor.
- 5.2Then click Edit > Find to open the search box and then type the exact name of whatever program you tried to uninstall during the quick steps at the start of the guide.
- 5.3Click Find Next and if a result comes up, click the registry key (folder) in the left panel that contains it and delete that key. Perform another search after each deleted key until there are no more results for that search query.
- 5.4Next, search for the name of any other programs you attempted to delete. Also search for the names of processes you ended in the Task Manager earlier in the guide.
-
5.5After you’ve deleted all relevant entries, manually navigate to these registry keys:
HKCU\Software\Microsoft\Windows\CurrentVersion\RunHKCU\Software\Microsoft\Windows\CurrentVersion\RunOnceHKLM\Software\Microsoft\Windows\CurrentVersion\RunHKLM\Software\Microsoft\Windows\CurrentVersion\RunOnceHKLM\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer\RunHKCU\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer\RunHKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\RunServicesHKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\RunServicesOnceHKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\RunOnce\SetupHKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services - 5.6Select each of these keys to reveal their contents in the right panel. Then look for values referencing LabubaRAT or any unknown applications. Delete only the specific values linked to the malware and leave the keys that contain them intact.